Full job description

TITLE: MAINTENANCE TECHNICIAN CLASSIFICATION: Non-Exempt

REPORTS TO: Maintenance Supervisor

SUMMARY/OBJECTIVE The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility/plant equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives.

ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. • Provide emergency/unscheduled repairs of production equipment during production • Maintenance: Troubleshooting/Diagnostic skills (mechanical, electrical, hydraulic). • Perform simple machinist duties and responsibilities. • Read and interpret equipment manuals and work orders to perform required maintenance and service. • Diagnose problems, replace or repair parts, test, and make adjustments. • Perform regular preventive maintenance on machines, equipment, and plant facilities. • Demonstrate basic knowledge of programmable logic controllers (PLC) • Perform basic Lathe and Mill operations: turning, grooving, parting, threading, drilling, boring, knurling and tapping • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties. • Comply with safety regulations and maintain clean and orderly work areas. • Organization of parts storage and tool storage. • Must be physically present with regular and dependable attendance.

REQUIRED SKILLS/ABILITIES • Technical Capacity • Mathematical skills • Ethical Conduct • Communication Proficiency • Results Driven • Initiative.

EDUCATION AND EXPERIENCE

• High School Diploma or GED

• 1-4 years of manufacturing experience

• Experience in equipment repair and maintenance

• PLC (programmable logic controls)
• Hydraulics and pneumatics
• Electrical
• Troubleshooting/diagnostic
• Bilingual in English and Spanish strongly preferred, but not required.

WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to shop floor machinery atmospheric conditions such as fumes or airborne particles, noise, extreme weather, vibration, and moving mechanical parts. The noise level in the work environment and work areas can be loud. Note, personal protective equipment (PPE) is required when entering the plant to include ear plugs, safety glasses, and steel toe boots. Disposable masks are optional.

PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing. The employee must be able to lift at least 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time position.

The schedule will be Monday through Thursday, 7:00am-3:30pm and Friday, 5:00am-1:30pm.

TRAVEL No travel is expected for this position.

AAP/EEO STATEMENT Edelbrock is proud to be an equal-opportunity workplace and an affirmative-action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other characteristic. We are an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities.

OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job Type: Full-time

Pay: $20.00 - $24.00 per hour

Expected hours: 40 per week

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Schedule:

• 8 hour shift
• Day shift

Experience:

• Hydraulics: 3 years (Required)
• PLC: 3 years (Required)
• CNC milling machine: 1 year (Preferred)
• CNC lathe: 1 year (Preferred)
• Electrical: 2 years (Required)

Ability to Commute:

• San Jacinto, CA 92583 (Required)

Work Location: In person

Job description

The Setup Technician – Sets up a wide variety of 3-5 Axis milling centers and manufacturing cells. Works with the crews associated with machining automotive aftermarket components in a fast-paced environment. This includes; reviewing manufacturing documents, setting up and running FAI parts on a variety of machines, tools/tooling properly measured and installed in carousels, part quality standards are met, and of the equipment is maintained to company defined standards and goals. Commitment to Quality and efficiency is required. Strong people skills and the ability to communicate across multiple organizational boundaries and disciplines are critical.

ESSENTIAL FUNCTIONS

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Knowledge of Makino’s Modular Machining Complex (MMC2) technology, modular automated material handling systems is a plus.
• Knowledge of Fanuc Macros and use of machine variables in NC Programs.
• Knowledge of Renishaw probing routines a plus.
• Knowledge of automotive aftermarket products a plus.
• Must be able to read and understand mechanical blueprints.
• Must be motivated and self-directed.
• Good attendance and punctuality required; previous steady, work history a must.
• Must be self-starting, inwardly motivated and pro-active.
• Must be able to work with a minimum amount of supervision and follow up.
• Must understand ISO Quality Policies and operate within its specification.
• Strong math skills.
• Coordinates schedules and sets up CNC Machines and manufacturing cell(s), to meet timelines.
• Documents setups and trains other personnel on proper setup and operation of jobs.
• Maintains heightened awareness of the project schedules and ensure jobs are setup and run based on project deadlines and budget performance.
• Anticipates and mitigates obstacles in the setup and operation of jobs.
• Identifies areas for improvement implements on the job and cross training accordingly.
• Ensures the processes and procedures are executed in accordance with company ISO Standards.
• Works with Project Managers and Manufacturing Engineers to identify and mitigate risk in the production process and to ensure production standards and goals are achieved.
• Takes responsibility for the cleanliness and organization of the work cell to 5S standards and Safety Standards.
• Recognizes when direction/plans are not clear within setups, resolves the issues, and documents the correct process to ensure proper setups in the future.
• Carries out special projects as assigned.
• Ability to check parts machined and make work offset adjustments when required to ensure parts are manufactured to controlling document specifications.
• Must follow all OSHA standards as well as all written and verbal company safety instructions that have been outlined in the safety manual and training.
• Follow written and verbal instructions.
• Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Treats others with respect and consideration regardless of their status or position; Accepts responsibility for own actions; Follows through on commitments.

· Performs other duties as assigned.

• Must be physically present with regular and dependable attendance.

REQUIRED SKILLS/ABILITIES

• Min 5 years programming and setting up horizontal and vertical CNC machines- Fanuc controls, Mill and/or Lathe
• Strong knowledge of Shop Skills and shop environment.
• Must be able to work with a minimum amount of supervision and follow up.
• Must be team oriented.
• Must have good communication skills.
• Lean Manufacturing skills a plus.
• Knowledge and use of shop floor inspection tools.

· Work well with others to maximize productivity and efficiency.

· Detail oriented mindset required to support the investigation and analysis of non-conformances.

· Pursue of zero defects.

EDUCATION AND EXPERIENCE

· High School diploma.

• Minimum 5 years of CNC Experience
• Must be able to read and follow Work Instructions
• In-depth knowledge and interpretation CNC Programming language (G-Code)
• Read and Understand Set up Sheets
• Knowledge of Cutting Tools, and cutting parameters (Speeds/Feeds)
• Familiar with FANUC, MAS-5, Haas, Mori Seiki, Makino and similar CNC controls

PREFERRED

• Bilingual in English and Spanish a plus

WORK ENVIRONMENT

This job operates in a Shop floor with exposure to fumes, airborne particles, noise, vibration and moving mechanical parts. Note, personal protective equipment (PPE) is required when entering the plant to include ear plugs, safety glasses, and steel toe boots. Disposable masks are optional, however, due to COVID-19, face coverings are required.

PHYSICAL DEMANDS

Some heavy lifting – up to 50 pounds. Any weight over 50 pounds will require a team lift. Must be physically able to exert up to 20lbs of force occasionally and/or up to 10lbs of force frequently. Frequent use of hands and fingers, handle and/or feel, reaching with hands and arms. Prolonged standing and sitting. Ability to bend, twist at waist level, lift from floor level, stoop and kneel. Occasionally requires the employee to talk and/or hear.

POSITION TYPE/EXPECTED HOURS OF WORK
This is a full-time position. Days and hours of work are Monday through Thursday:

· 2nd Shift

· 4:00pm – 2:30am

TRAVEL

No travel is expected for this position.

AAP/EEO STATEMENT

Edelbrock is proud to be an equal opportunity workplace and an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other characteristic. We are an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individual with Disabilities.

OTHER DUTIES

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Ability to commute/relocate:

• San Jacinto, CA: Reliably commute or planning to relocate before starting work (Preferred)

Education:

• High school or equivalent (Preferred)

Experience:

• CNC Set Up: 5 years (Preferred)

Shift availability:

• Overnight Shift (Preferred)
• Night Shift (Preferred)
• Day Shift (Required)

Work Location: One location

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Employee discount
• Flexible spending account
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Retirement plan
• Vision insurance

Schedule:

Monday - Thursday

2nd Shift: 4 pm to 2:30 am

• 10 hour shift
• Day shift
• Monday to Friday
• Night shift
• Overtime

Ability to commute/relocate:

• San Jacinto, CA 92583: Reliably commute or planning to relocate before starting work (Required)

Experience:

• CNC lathe: 3 year (Required)
• Set Up: 3 year (Required)

Work Location: One location

Job Type: Full-time

Salary: $22.00 - $28.00 per hour

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee discount
• Health insurance
• Health savings account
• Life insurance
• Paid time off
• Referral program
• Vision insurance

Ability to commute/relocate:

• San Jacinto, CA 92583: Reliably commute or planning to relocate before starting work (Required)

Experience:

• Fanuc Controls: 3 years (Required)
• Set up CNC Machines: 3 years (Required)
• CNC lathe: 2 years (Required)

Application Question(s):

• What is your desired hourly rate?
• Can you commute to San Jacinto, CA?

Experience:

• CNC Setup: 3 years (Required)
• CNC lathe/mill: 3 years (Required)
• Fanuc Controls: 3 years (Required)

Work Location: In person

Job description

TITLE: MAINTENANCE TECHNICIAN

CLASSIFICATION: Non-Exempt

REPORTS TO: Maintenance Supervisor

SUMMARY/OBJECTIVE
The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility/plant equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives.

ESSENTIAL FUNCTIONS
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Provide emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service.
• CNC maintenance: Troubleshooting/Diagnostic skills (mechanical, electrical, hydraulic).
• Perform simple machinist duties and responsibilities.
• Read and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Use a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Comply with safety regulations and maintain clean and orderly work areas.
• Organization of parts storage and tool storage.
• Must be physically present with regular and dependable attendance.

REQUIRED SKILLS/ABILITIES

• Technical Capacity
• Troubleshoot Makino, Mori Seiki & Haas Machines
• CNC Machine Maintenance and repair
• Mathematical skills
• Ethical Conduct
• Communication Proficiency
• Results Driven
• Initiative

EDUCATION AND EXPERIENCE

• High School Diploma or GED
• 1-4 years of manufacturing experience
• Experience in equipment repair and maintenance
• Mill and lathe work experience preferred
• CNC experience required
• Fanuc control experience: Haas, Mori Seiki & Makino

PREFERRED

• Bilingual in English and Spanish strongly preferred, but not required.

WORK ENVIRONMENT
While performing the duties of this job, the employee is frequently exposed to shop floor machinery atmospheric conditions such as fumes or airborne particles, noise, extreme weather, vibration, and moving mechanical parts. The noise level in the work environment and work areas can be loud. Note, personal protective equipment (PPE) is required when entering the plant to include ear plugs, safety glasses, and steel toe boots. Disposable masks are optional.

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing. The employee must be able to lift at least 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

TRAVEL
No travel is expected for this position.

AAP/EEO STATEMENT
Edelbrock is proud to be an equal opportunity workplace and an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status or any other characteristic. We are an Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individual with Disabilities.

OTHER DUTIES
Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Work Remotely

• No

Job Type: Full-time

Salary: $28.00 - $38.00 per hour

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Employee assistance program
• Employee discount
• Flexible spending account
• Health insurance
• Life insurance
• Paid time off
• Parental leave
• Referral program
• Retirement plan
• Vision insurance

Schedule:

• 4x10
• 10 hour shift
• Monday to Thursday- 6 AM - 4:30 PM
• Weekend availability
• Overtime

Work Location: One location